2018 - EDRMedeso
ANSYS Discovery used by Rossignol for Ski Product Development

ANSYS Discovery used by Rossignol for Ski Product Development

December 20, 2018

Rossignol has a team of engineers that work with skiers, designers and others to create new products. Of course, time to market is critical for them in terms of the ski season. With ANSYS Discovery th...

We are partnering up with PTC to accelerate digital twin technology

We are partnering up with PTC to accelerate digital twin technology

December 11, 2018

By Frode Halvorsen, Vice President at EDRMedesoAt EDRMedeso, we keep developing our solutions and the product portfolio we offer our clients. We only work with the best suppliers and we’ve had l...

Now available Releases Rocky DEM Version 4.2 Software

Now available Releases Rocky DEM Version 4.2 Software

December 5, 2018

The latest version of Rocky DEM high-fidelity particulate software adds to and deepens modeling capabilities, including particle collision analysis, spring and damper motion, fiber modeling improvemen...

EDRMedeso celebrates the 100-employee mark

EDRMedeso celebrates the 100-employee mark

December 5, 2018

By Niklas Lindwall, CEO at EDRMedesoToday, we reach a milestone at EDRMedeso – our employee number 100. This growth would not have been possible without our trusted suppliers and valued customer...

Targeting a Tumor

Targeting a Tumor

November 26, 2018

By devising a new computational method that tracks the flow of therapeutic drug particles in an aerosol from the lips to the lungs, researchers can deposit a drug on a targeted lung tumor with 90 perc...

Additive Manufacturing: A New Frontier for Simulation

Additive Manufacturing: A New Frontier for Simulation

November 21, 2018

Additive manufacturing — popularly known as 3D printing — is poised to revolutionize both engineering and production. With its capability to quickly turn a digital design into a physical product,...

i-Theses and Trimble join forces to simplify BIM to fabrication workflows in precast industry

i-Theses and Trimble join forces to simplify BIM to fabrication workflows in precast industry

November 21, 2018

i-Theses, a developer of specialized software solutions for precast concrete manufacturers and Trimble, a developer of structural building information modelling (BIM) software Tekla Structures, have s...

Predicting Component Loads Using Third Party Multibody Dynamics Software for ANSYS

Predicting Component Loads Using Third Party Multibody Dynamics Software for ANSYS

November 16, 2018

ANSYS is a great tool when you know the loads to input into your structural analysis.However, these loads are not always easy to find. This is especially true when simulating a moving assembly tha...

Personalized Implants Restore Smiles

Personalized Implants Restore Smiles

November 15, 2018

By Sarah Fink, Design Engineer and Aaron Atkinson, Design Engineer, OMX Solutions, Melbourne, AustraliaWhen people are missing multiple teeth and large sections of their oral bone structure, they...

The Executive’s three-dimensional digital moat – why and how?

The Executive’s three-dimensional digital moat – why and how?

October 23, 2018

By Jani Ojala, Country Manager of EDRMedeso in Finland and the United KingdomThe way products are designed, manufactured and operated is changing quicker than ever. We are experiencing a number of...

Hands-on simulations with thesis projects

Hands-on simulations with thesis projects

October 18, 2018

Read the test here!Simulations can be recognized as an important skill to master not only from individual, but also from the economic and environmental point of view. The world has come to realize...

Dimensions Magazine

Dimensions Magazine

October 12, 2018

Today’s business environment is extremely competitive and driven by product engineering innovation. This issue of Dimensions magazine explores how world-leading companies tackle challenges including...

Trimble Announces Tekla Global BIM Awards 2018 Winners

Trimble Announces Tekla Global BIM Awards 2018 Winners

September 19, 2018

SUNNYVALE, Calif., Sept. 19, 2018—Trimble (NASDAQ; TRMB) announced today the winners of its Tekla Global Building Information Modeling (BIM) Awards, a biennial competition showcasing the worlds...

ANSYS Innovation Conference – Aberdeen, UK

ANSYS Innovation Conference – Aberdeen, UK

September 14, 2018

Worldwide demand for oil and gas means increased production in challenging and unconventional fields. As specialists in digital engineering, EDRMedeso collaborates with a range of oil &am...

Nytt kurs: Modellering av Tekla strukturer ved hjelp av Rhino/Grasshopper

Nytt kurs: Modellering av Tekla strukturer ved hjelp av Rhino/Grasshopper

September 12, 2018

Vi ønsker deg velkommen til kurs på modellering av Tekla strukturer ved hjelp av Rhino/Grasshopper her i Sandvika 19/10-2018.Du kan også kombinere dette kurset sammen med Tekla Structures Brupr...

Is the physical prototype obsolete?

Is the physical prototype obsolete?

September 10, 2018

By Mark Milton, Country Manager in Denmark for EDRMedesoDigitization, digital transformation and innovation are notions we constantly hear about in the media from politicians and in our daily work...

EDRMedeso wants to help the universities to increase the interest towards technical education

EDRMedeso wants to help the universities to increase the interest towards technical education

September 5, 2018

EDRMedeso promotes ANSYS technologies in teaching and research activities because of increased need of simulations, digital labs and IoT in society. By making sure that ANSYS tools are easily accessib...

Curious about the future of data collection in manufacturing?

Curious about the future of data collection in manufacturing?

August 24, 2018

Read this article from Manufacturing Global, featuring Theresa Bui, Director of Internet of Things Strategy at Cisco....

The Future of Electrification in the Automotive Industry

The Future of Electrification in the Automotive Industry

August 20, 2018

For as long as combustion engines have been powering automotives around the world, the answer has always been fuel. But are we seeing a revolutionary change in the way we power our cars?Amidst a t...

Take charge of your design risks

Take charge of your design risks

August 20, 2018

By Jani Ojala, Country Manager of EDRMedeso in Finland and the United KingdomAlmost every company I’ve met over the last 10 years have endured warranty costs and lost deals due to lack of qualit...

IDEA StatiCa UK Users Day 2018

IDEA StatiCa UK Users Day 2018

August 9, 2018

Fancy visiting London?!How about grabbing the opportunity to combine a short getaway with getting informed about the latest developments in steel connection design and IDEA StatiCa?!IDEA Stati...

Simulation and IoT make it possible for companies to get new or improved products faster to the market!

Simulation and IoT make it possible for companies to get new or improved products faster to the market!

August 7, 2018

Simulation and IoT make it possible for companies to get new or improved products faster to the market. The Manufacturer has published this article about how intelligent use of data can improve a busi...

Learn how innovative companies use simulation to develop products in a climate-changing world

Learn how innovative companies use simulation to develop products in a climate-changing world

July 11, 2018

Rising demands from customers, government regulations and increasing competition is driving a new form of innovation based on system- and subsystem-level simulation; i.e. simulations covering entire s...

Tekla Structures BIM software used to construct 2018  World Cup stadiums

Tekla Structures BIM software used to construct 2018 World Cup stadiums

June 14, 2018

Eight of the twelve stadiums that will host the 2018  World Cup in Russia have been constructed using Trimble's Tekla Structures software. They are now ready to welcome football fans in Moscow, Saint...

Next generation IoT for developing better products and services

Next generation IoT for developing better products and services

June 11, 2018

The excitement about IoT and predictive maintenance is real – and it is here for a good reason. You may have heard about apps for cars that alert the users when they need service. Or perhaps you hav...

RELEASE NOTICE for ETABS v17.0.0

RELEASE NOTICE for ETABS v17.0.0

June 4, 2018

Computers and Structures, Inc. is pleased to announce the release of ETABS v17.0.0. True to our tradition, we are again advancing the state-of-the-art in structural engineering technology with innovat...

Tekla Structural Designer

Tekla Structural Designer

May 24, 2018

Tekla Structural Designer is revolutionary software that gives engineers the power to analyze and design buildings efficiently and profitably. Achieve faster design times, establish the best solution...

Join ANSYS and EDRMedeso at Turbo Expo in Lillestrøm, Norway, June 12-14, 2018.

Join ANSYS and EDRMedeso at Turbo Expo in Lillestrøm, Norway, June 12-14, 2018.

May 14, 2018

Visit ANSYS and EDRMedeso at Booth #401 at the Norway Exhibition and Convention Center.You've already solved your easy problems. Now, only the toughest challenges remain. But even the hardest prob...

Tekla Brukermøte 2018

Tekla Brukermøte 2018

April 27, 2018

Årets Tekla Brukermøte 2018, var i år sammen med Novapoint Brukermøte i Stavanger 24.-25.-26.april.Det var 3 dager med et tettpakket program, fulle av interesante foredrag og usercaser.Vi...

Five reasons to use 3D design and simulation in product development

Five reasons to use 3D design and simulation in product development

April 26, 2018

Any engineer working with product design will recognise that the process of designing and testing prototypes can be slow and tedious. Many product developers have most likely tried to design and creat...

IDEA StatiCa 9.0 released!

IDEA StatiCa 9.0 released!

April 11, 2018

After a year of hard work, we are proud to show the next step in design and code-check of steel connections. Since the first release of IDEA StatiCa Connection in May 2014, we have collected a tremend...

ANSYS Discovery used by Wibotic for Autonomous Battery Charging Systems

ANSYS Discovery used by Wibotic for Autonomous Battery Charging Systems

April 5, 2018

Wibotic is an innovative company in a fast moving industry - they build autonomous battery charging systems for aerial drones. They turned to ANSYS Discovery to ensure their designs were adequately pe...

Smoother workflows with the new Tekla 2018 versions

Smoother workflows with the new Tekla 2018 versions

March 21, 2018

Don’t freeze in the middle of your structural projects.THE NEW 2018 VERSIONS of Tekla software offer faster 3D modeling process, better drawing production and control over changes. The...

The Olympic Gangneung Ice Arena: Beautiful sports structure built with Tekla BIM technology by Trimble

The Olympic Gangneung Ice Arena: Beautiful sports structure built with Tekla BIM technology by Trimble

March 14, 2018

Tekla Structures was utilized for the design of Gangneung Ice Arena, the venue for figure skating and short track in PyeongChang Winter Olympic Games. Optimized design and construction process of the...

New video – Weld Strenght App!

New video – Weld Strenght App!

March 7, 2018

Watch how you can work 10x faster with weld simulation and evaluation! Pre and Post processing tool to create weld contacts, imprints, build solid fillet welds and evaluate weld strength according to...

EDRMedeso Ambassador at NTNU

EDRMedeso Ambassador at NTNU

March 1, 2018

Due to growing ANSYS usage at NTNU, with a large number of active users, an EDRMedeso Ambassador at NTNU is established.  Background – EDRMedesoEDRMedeso is the leading supplier of s...

Release OptiSLang 7.0

Release OptiSLang 7.0

February 13, 2018

The most relevant changes are• Support of ANSYS Release 19.0 • Adaptive MOP - iterative metamodeling and datapoint refinement for more efficient parametric studies • Process & Script n...

ROHR2 User Seminar

ROHR2 User Seminar

January 30, 2018

Date: March 15, 2018 Time: 10.00-15.00 Place: Kopparlunden, Västerås Host: EDR&Medeso AB and SIGMA Ingenieurgesellschaft mbH  Are you curious and someone who:• wants to learn...

Oil and Gas industry

Oil and Gas industry

January 16, 2018

The oil and gas industry’s sharp focus on safety and reliability is based on the economics of oil and gas production, maintenance and unscheduled downtime — and along with that comes environmental...

Uppsala University and Vasa Museum

Uppsala University and Vasa Museum

January 12, 2018

ANSYS Hall of fame - Uppsala University and Vasa Museum The Vasa ship, the best-preserved 17th century ship in the world, is deforming in its museum setting in Sweden. Researchers used ANSYS Mechanic...

Lappeenranta University of Technology

Lappeenranta University of Technology

January 11, 2018

ANSYS Hall of Fame 2018 - Lappeenranta University of Technology Improving compressor and turbine performance in supercritical CO2 radial turbines is a major route to increasing the efficiency of the...

You do not need to work at a large enterprise organization to take advantage of the benefits of HPC!

You do not need to work at a large enterprise organization to take advantage of the benefits of HPC!

January 9, 2018

Have a look at our guide that will inform you about the 6 essential things you need to know for convincing you to use HPC!Read more about…• Value proposition of HPC • No need of inter...

Models help to explore the effectiveness of completely new and unconventional approaches in ski design

Models help to explore the effectiveness of completely new and unconventional approaches in ski design

January 9, 2018

Lucerne University of Applied Sciences and Arts Problem As part of a research project together with the company Stöckli Swiss Sports AG, the Lucerne University of Applied Sciences and Arts has deve...

You will find our earlier posts below.

    Our customers

    We use cookies to improve your experience on our website. Read more in our privacy policy. By browsing this website, you agree to our use of cookies.