ANSYS INNOVATION  CONFERENCE

A free, two day event focused on the oil & gas industry, specifically tailored towards fluids and structural simulation using ANSYS. 

10th-11th October
Mercure Ardoe House Hotel
South Deeside Road, Blairs, AB12 5YP


Register Now

WHAT OUR CUSTOMERS SAY

COMPANIES THAT USE OUR PRODUCTS EVERYDAY

After integrating the productivity toolkit from EDR Medeso in our workflow, we have reduced the time to configure the flange assembly for a typical swivel analysis by more than 90%. It is now done in no time and it just takes two clicks to change the bolt pretension.”

BETRANA HUWIG

Join us in Aberdeen where we'll be sharing our best practices, local expert knowledge and the latest tools of the digital age

We welcome you to attend the entire event, or only the parts you find most suited for your business!

ABOUT US

CONTACT

SUBSCRIBE

WELCOME TO OUR FREE OIL & GAS EVENT

HOW EDR MEDESO CAN HELP YOU

Register Now

Follow us on social media for regular updates




EDR&Medeso AS
Leif Tronstads plass 4
NO-1337 Sandvika
NORWAY


Switchboard and Sales:

+47 67 57 21 00
Support:
+47 67 57 21 20


Mail: info@edrmedeso.com

Since 1986, EDRMedeso has provided the market with leading tools for product simulation and BIM. As a complete partner, we also offer support, training and consulting services for these tools. The goal is to enable our customers to always get the maximum benefit out of their software investment – thus facilitating the design of better products and buildings.

Senior Project Engineer
OneSubsea Swivel and Marine Systems

14:30-15:00
Correlation of Simulation and Test for Large Fabricated Structures

Mark Robinson, ANSYS

11:30-12:30
19.0 Fluids Update

11:30-12:30
19.0 Structures Update

14:00:14:30
CFD: Colourful Fluid Dynamics or a Valuable Engineering Design Tool?
Steve Howell, Abercus

16:30-18:00
Networking drinks

15:45-16:15
Customer Presentations (TBA)

14:00-14:30
Structural Code Checking with ANSYS Mechanical and SDC Verifier 
Yaroslav Yurechko, SDC

14:30-15:00
Correlation of Simulation and Test for Large Fabricated Structures

Mark Robinson, ANSYS

12:30-13:30 Lunch

09:00 - 10:00 
10:00 - 10:15

10:15 - 11:15
11:15 - 11:30

Registration
Welcome & Introduction
ANSYS Technology Update
Break

13:30-14:00
Fatigue Assessment of Deck Mounted Structures 
Peter Ward, PDL Solutions (Europe) Ltd

13:30-14:00
FSI Simulation of Fluid-Film Thrust Bearings

Ed Carman, ANSYS

15:15-15:45
Use of Multiphase CFD to Evaluate Pipe Burial Operations 
James Dobson, PDL Solutions (Europe) Ltd

15:00-15:15 Break

DAY 2
SEMINARS & WORKSHOPS

DAY 1

DNVGL-RP-C208 for ANSYS Users*



Structures

Seminar presenting the new version of the recommended practice DNVGL-RP-C208, Determination of Structural Capacity by Non-Linear FE Analysis Methods. In general, the RP is meant to supplement structural design standards presenting methods that allow for using non-linear FE methods to determine resistance for cases that are not covered by traditional standards. This new version covers several new topics and the guidelines have been expanded and improve based on experience from practical use. In the current seminar, the RP will be presented focusing on how the analyses can be performed in ANSYS, theory for both non-linear FE methods and the different failure modes.

Spaceclaim Geometry clean-up and Productivity

Improving Productivity with FLUENT R19

Solver Mesh Interactions - Interfaces, Overset Mesh, PUMA Adaption 

Erosion Modelling with Moving Deforming Mesh



Fluids

Register for More Information

*DNVGL-RP-C208 training will be offered free of charge for conference visitors. EDR Medeso usually provides this for £1000

15:45-16:15
Use of Global and Local FEA in the Design and Analysis of Offshore Systems
Michael Shore, 2H Offshore

16:30-18:00
Networking drinks

Worldwide demand for oil and gas means increased production in challenging and unconventional fields.
As specialists in digital engineering, EDR Medeso collaborates with a range of oil & gas companies. With our expertise, we help them gain the full benefits of digital simulation.
The ANSYS oil and gas simulation software we supply, is enabling companies to design, verify and deliver more reliable equipment at lower cost.


Communication Systems &
Data Transfer

Electrical Machines & 
Power Electronics

Processing, Storage
& Transfer Systems

Thermal Systems 
& Emissions Control

Power Cables &
Power Generation Systems

Structures & 
Mechanical Systems

Remote Operation &
Monitoring Systems

Boosting &
Compression Systems

Drilling & Downhole
Tools & Systems

Well Head & 
Subsea System

JEAN-FRANCOIS NOEL

Principal Engineer
OneSubsea Processing

We saved 15% time on our pressure vessel analysis using the ASME code check from the new productivity toolkit developed by EDR Medeso. In our department this corresponds to a saving of 60 man-days per year. As the toolkit is also used at several other departments at OneSubsea, it significantly reinforces the return on our ANSYS investment”

15:45-16:15
ANSYS Fluent Innovations Speed CFD Simulation
Robert Winstanley, ANSYS

14:30-15:00
Using Engineering Simulations to create Digital Twin for IoT Predictive Maintenance
Gary Panes, EDRMedeso

15:15-15:45
Using Engineering Simulations to create Digital Twin for IoT Predictive Maintenance

Gary Panes, EDRMedeso

14:00-14:30
Structural Code Checking with ANSYS Mechanical and SDC Verifier 
Yaroslav Yurechko, SDC

15:45-16:15
ANSYS Fluent Innovations Speed CFD Simulation
Robert Winstanley, ANSYS

15:45-16:15
Use of Global and Local FEA in the Design and Analysis of Offshore Systems
Michael Shore, 2H Offshore

15:45-16:15
ANSYS Fluent Innovations Speed CFD Simulation
Robert Winstanley, ANSYS