Start 2016 with a training course

Start 2016 with a training course

December 30, 2015

Get the best start of 2016 with a training course.The EDRMedeso Group provides knowledge transfer for efficient simulation processes for a wide area of physics. In order to ensure your software in...

New training course – ROHR2 at EDRMedeso

New training course – ROHR2 at EDRMedeso

December 28, 2015

ROHR2 Introduction training course - new at EDRMedeso.ROHR2 is the leading European Software for Pipe Stress Analysis, a standard tool for pipe static and structural framework analysis. The main...

Research Funds for FSI Simulations

Research Funds for FSI Simulations

December 17, 2015

EDRMedeso is proud to announce that is has been granted funding from the Research Council of Norway to undertake development related to FSI simulations on rotating equipment. The funding is on more...

Tekla Webinar: Wednesday 13th January 2016

Tekla Webinar: Wednesday 13th January 2016

December 14, 2015

For Big-D, Choosing Tekla to Improve Concrete Building Business Performance Was As Easy As ABC.Established in 1967, Big-D Construction is ranked among the top builders in the U.S.A. Big D have fea...

Support on workdays between Christmas and New Year’s eve

Support on workdays between Christmas and New Year’s eve

December 14, 2015

The ANSYS, CAEPIPE, SpaceClaim support will be open all workdays between Christmas and New Year’s eve.andthe Tekla Structures, CSi and Powerconnect support will be closed all workdays betwee...

Training Roadmap and Matrix

Training Roadmap and Matrix

December 8, 2015

EDRMedeso training roadmaps illustrate how the trainings are interconnected. They also provide information about the prerequisites for each training.EDRMedeso -Your ANSYS channel partner in the N...

Webinar – ANSYS AIM – December 11th

Webinar – ANSYS AIM – December 11th

December 4, 2015

ANSYS AIM is a new engineering simulation product from ANSYS, and provides an integrated solution for 3D engineering simulation encompassing the breadth of ANSYS physics in a single, modern user envir...

NEW webinars – ANSYS Maxwell

NEW webinars – ANSYS Maxwell

December 2, 2015

New series of webinars is now rolled out - ANSYS Maxwell. ANSYS Maxwell is the premier electromagnetic field simulation software for engineers tasked with designing and analyzing 2-D and 3-D electro...

ANSYS SpaceClaim 2016 is here!

ANSYS SpaceClaim 2016 is here!

December 2, 2015

Introducing the next evolution of fast geometry creation and editing.With the release of ANSYS SpaceClaim 2016, we leave the competition in the dust with 10x faster 3D modeling than any other prod...

EDRMedeso is looking for a CFD Engineer in Norway

EDRMedeso is looking for a CFD Engineer in Norway

November 25, 2015

EDRMedeso has provided the market with leading tools for product simulation and BIM. As a complete partner, we also offer support, training and consulting services for these tools. The goal is to enab...

SpaceClaim is a 3D modelling tool

SpaceClaim is a 3D modelling tool

November 24, 2015

SpaceClaim is a 3D modelling tool that complements conventional CAD programs and can be used to create conceptual geometries or prepare CAD models for simulations. It uses a history-free, direct model...

EDRMedeso support The Swedish Childhood Cancer Foundation Christmas 2015

EDRMedeso support The Swedish Childhood Cancer Foundation Christmas 2015

November 19, 2015

Your ANSYS Channel Partner in the Nordic support The Swedish Childhood Cancer Foundation Christimas 2015....

EDRMedeso at Elmia Subcontractor Fair, simulation today

EDRMedeso at Elmia Subcontractor Fair, simulation today

November 12, 2015

Elmia Subcontractor is Northern Europe's leading trade show for subcontractors in the manufacturing industry and their customers - a genuine specialist fair for product development and purchasing. The...

ANSYS Advantage Volume IX Issue 3 2015 proud EDRMedeso

ANSYS Advantage Volume IX Issue 3 2015 proud EDRMedeso

October 27, 2015

New ANSYS Advantage Volume IX Issue 3 2015 and EDRMedeso is proud of its customer Grundfos engaged on page 13. Pumped - Grundfos, simulation-driven development increases pump efficiency and reduces p...

ANSYS AIM multiphysics platform seminars in the Nordic region!

ANSYS AIM multiphysics platform seminars in the Nordic region!

October 26, 2015

In 2015 ANSYS released the first integrated and comprehensive multiphysics platform designed for all engineers – ANSYS Integrated Multiphysics (AIM). The platform will allow companies to gain insigh...

Grundfos simulation of pumps in next ANSYS Magazine

Grundfos simulation of pumps in next ANSYS Magazine

October 21, 2015

Simulation-driven development increases pump efficiency and reduces product development time at one of the world’s leading pump manufacturers. Grundfos engineers significantly improved hydraulic ef...

ANSYS technology and Ferrari racing

ANSYS technology and Ferrari racing

October 16, 2015

From Virutal Prototype to Real-World Championships - ANSYS and Ferrari racing! Using ANSYS simulation technology, Ferrari is realizing its product promise by optimizing critical aspects of its race...

SpaceClaim webinar – October 19th

SpaceClaim webinar – October 19th

October 13, 2015

Lightning fast model generation In simulation, geometry generation and manipulation of geometry represent a considerable part of the time used for simulation model generation. As an important part in...

ANSYS® AIM™: Integrated Multiphysics Simulation Environment for All Engineers

ANSYS® AIM™: Integrated Multiphysics Simulation Environment for All Engineers

September 22, 2015

ANSYS 16.0 delivered the first integrated and comprehensive multiphysics simulation platform designed for all engineers. This platform, called AIM, is the further realization of the ANSYS Workbench s...

Tekla Webinar: Wednesday 7th October 2015

Tekla Webinar: Wednesday 7th October 2015

September 22, 2015

Get the most out of Tekla with maintenanceWith Tekla you can improve your business with increased efficiency and improved quality in detailing, fabrication and construction. Tekla maintenance secu...

ANSYS AIM Seminar in Finland

ANSYS AIM Seminar in Finland

September 16, 2015

In 2015 ANSYS released the first integrated and comprehensive multiphysics platform designed for all engineers – ANSYS Integrated Multiphysics (AIM). The platform will allow companies to gain insig...

New video – Low Frequency

New video – Low Frequency

September 10, 2015

ANSYS Maxwell® is a comprehensive electromagnetic field simulation software for engineers tasked with designing and analyzing 3D/2D structures, such as motors, actuators, transformers and other elect...

ANSYS + Metso Minerals OY + EDRMedeso

ANSYS + Metso Minerals OY + EDRMedeso

September 10, 2015

Our goal in designing the new C130 jaw crusher was to deliver greater work capacity without increasing the weight of the machine. We used ANSYS SpaceClaim to create multiple design alternatives and AN...

Training course – ANSYS Mechanical

Training course – ANSYS Mechanical

September 8, 2015

This course is the foundation for working with structural mechanics simulations in ANSYS Workbench. The goal of the course is to make users familiar with the interface and enable them to perform diffe...

ANSYS AIM seminar in Sweden

ANSYS AIM seminar in Sweden

September 7, 2015

In 2015 ANSYS released the first integrated and comprehensive multiphysics platform designed for all engineers – ANSYS Integrated Multiphysics (AIM). The platform will allow companies to gain insig...

Aas-Jakobsen Finds New Ways of Working with Tekla Model Sharing

Aas-Jakobsen Finds New Ways of Working with Tekla Model Sharing

September 4, 2015

Aas-Jakobsen, a Norwegian civil engineering company with special expertise within structural engineering, was swamped with work four years ago. The company had two very large projects in their buildin...

Aas-Jakobsen Finds New Ways of Working with Tekla Model Sharing

Aas-Jakobsen Finds New Ways of Working with Tekla Model Sharing

September 4, 2015

Aas-Jakobsen, a Norwegian civil engineering company with special expertise within structural engineering, was swamped with work four years ago. The company had two very large projects in their buildin...

Aas-Jakobsen Finds New Ways of Working with Tekla Model Sharing

Aas-Jakobsen Finds New Ways of Working with Tekla Model Sharing

September 4, 2015

Aas-Jakobsen, a Norwegian civil engineering company with special expertise within structural engineering, was swamped with work four years ago. The company had two very large projects in their buildin...

Webinar – ANSYS AIM – Fridays fall 2015

Webinar – ANSYS AIM – Fridays fall 2015

September 3, 2015

-ANSYS AIM is a new engineering simulation product from ANSYS, and provides an integrated solution for 3D engineering simulation encompassing the breadth of ANSYS physics in a single, modern user envi...

ANSYS Hall of Fame Competition

ANSYS Hall of Fame Competition

September 3, 2015

Enter your eye-popping simulation images and videos in the ANSYS Hall of Fame Competition and showcase your simulation abilities to a worldwide audience. Winners will be selected based on the quality...

13th Multiphase Flow Conference & Short Course – ANSYS & HZDR – 24 – 26 November 2015, Dresden

13th Multiphase Flow Conference & Short Course – ANSYS & HZDR – 24 – 26 November 2015, Dresden

September 2, 2015

Helmholtz-Zentrum Dresden-Rossendorf (HZDR) and ANSYS Germany will host the 13th Multiphase Flow Conference and Short Course from 24 - 26 November 2015 in Dresden Rossendorf. You can find more inform...

13th Multiphase Flow Conference & Short Course – ANSYS & HZDR – 24 – 26 November 2015, Dresden

13th Multiphase Flow Conference & Short Course – ANSYS & HZDR – 24 – 26 November 2015, Dresden

September 2, 2015

Helmholtz-Zentrum Dresden-Rossendorf (HZDR) and ANSYS Germany will host the 13th Multiphase Flow Conference and Short Course from 24 - 26 November 2015 in Dresden Rossendorf. You can find more informa...

The Subcontractor Trade Fair/Alihankintamessut 2015

The Subcontractor Trade Fair/Alihankintamessut 2015

August 28, 2015

The Subcontracting Trade Fair will take place on 15th to the 17th of September 2015 in Tampere, Finland Exhibition and Sports Centre.This year the themes of the international trade fair will be...

Our Toolkits – now avaliable on ANSYS Customer Portal

Our Toolkits – now avaliable on ANSYS Customer Portal

August 28, 2015

To help you get the most out of your software, we continuously work with developing new software add-ins and toolkits to tailor the software to your needs. In some cases we develop industry-specific t...

AIM seminar in Denmark

AIM seminar in Denmark

August 27, 2015

In 2015 ANSYS released the first integrated and comprehensive multiphysics platform designed for all engineers – ANSYS Integrated Multiphysics (AIM). The platform will allow companies to gain insigh...

“hi” much more than a trade fair

“hi” much more than a trade fair

August 26, 2015

Everyone is welcome at the "hi" technolgy and industry expo 2015 from 22-24 September in MCH Messecenter Herning.EDRMedeso will be there. Most welcome to our stand 8214!...

"hi" much more than a trade fair

"hi" much more than a trade fair

August 26, 2015

Everyone is welcome at the "hi" technolgy and industry expo 2015 from 22-24 September in MCH Messecenter Herning.EDRMedeso will be there. Most welcome to our stand 8214!...

Superuser training program in Denmark

Superuser training program in Denmark

August 26, 2015

With the easy-of-use of ANSYS Workbench and the increased robustness of advanced structural models in ANSYS we are seeing an increased interest among our customers to deploy more advanced structural m...

ANSYS Student – free download

ANSYS Student – free download

August 18, 2015

To better prepare the engineering leaders of tomorrows, ANSYS is excited to offer students a FREE download of our software.ANSYS Student gives you the tools you'll use in your future careers. Lear...

Den Kloke Tegning 2015

Den Kloke Tegning 2015

August 13, 2015

Geoforum og representanter fra bransjen inviterer til Den Kloke Tegning 13-14 oktober på Scandic Fornebu.Den Kloke Tegning vil ta utgangspunkt i dagens bruk av 3D og åpen BIM. Vi skal vise...

ANSYS release 16.2 now available

ANSYS release 16.2 now available

August 12, 2015

ANSYS 16.2 makes it possible, for the first time, for engineers to create and validate complete virtual prototypes of entire systems. Simulating electrical, electronic, thermo-fluid, mechanical and em...

Tekla Webinar August 5’th: Discover the ideal solution for miscellaneous steel with Apex Structural Design

Tekla Webinar August 5’th: Discover the ideal solution for miscellaneous steel with Apex Structural Design

July 2, 2015

Apex Structural Design has long history in providing quality detailing services. They provide full service detailing and handle all types of work from small miscellaneous projects to large commercial...

Tekla Webinar August 5'th: Discover the ideal solution for miscellaneous steel with Apex Structural Design

Tekla Webinar August 5'th: Discover the ideal solution for miscellaneous steel with Apex Structural Design

July 2, 2015

Apex Structural Design has long history in providing quality detailing services. They provide full service detailing and handle all types of work from small miscellaneous projects to large commercial...

Grundfos Management and ANSYS

Grundfos Management and ANSYS

June 25, 2015

Grundfos is a global leader in advanced pump solutions and a trendsetter in water technology. The company applies ANSYS tools as a vital part of its product design cycle, reducing the number of proto...

SAP2000 Basic training and SAP2000 Earthquake course in Iceland

SAP2000 Basic training and SAP2000 Earthquake course in Iceland

June 24, 2015

In collaboration with the University of Iceland, Øystein Flakk from EDRMedeso AS will teach you CSI SAP2000 and SAP2000 Earthquake.SAP2000: This training course will give a practical guide on h...

Howden – EDRMedeso

Howden – EDRMedeso

June 15, 2015

EDRMedeso have supported us to implement Simulation Driven Product Development using ANSYS Workbench, enabling us to take fan technology to a new level and expand our leading position in the market....

Aas-Jakobsen finds new ways of working with Tekla Model Sharing

Aas-Jakobsen finds new ways of working with Tekla Model Sharing

June 8, 2015

Aas-Jakobsen has used Tekla Model Sharing for two years and Erik Hersleth share their experiences at the next webinar 1 July.In this webinar Erik Hersleth, BIM coordinator at Aas-Jakobsen, talks a...

Increase your skills and enjoy your summer even more!

Increase your skills and enjoy your summer even more!

June 4, 2015

Register to one of our scheduled training courses at our Västerås office before June 30, and you will gain valuable knowledge and receive a nice sun chair to bring home. Register today! EDRMedeso...

Welcome to the all-new EDRMedeso web page!

Welcome to the all-new EDRMedeso web page!

June 1, 2015

We hope you will find our new web page informative and interesting!If you have any question, please contact the EDRMedeso team today! (more…)...

Simulation for the Automotive Industry

Simulation for the Automotive Industry

May 25, 2015

A hundred years ago, Henry Ford promised customers that their car could be painted any color so long as it was black. Today, color is the least of the auto industry’s challenges. The car of the 21st...

RELEASE NOTICE for SAP2000 v17.2.0

RELEASE NOTICE for SAP2000 v17.2.0

May 21, 2015

EDR&Medeso and Computers and Structures, Inc. is pleased to announce the release of SAP2000 v17.2.0. This is an intermediate update to Versions 17.0.0 through 17.1.1. We recommend that users updat...

RELEASE NOTICE for CSiBridge 2015 (v17.2.0)

RELEASE NOTICE for CSiBridge 2015 (v17.2.0)

May 21, 2015

EDR&Medeso and Computers and Structures, Inc. is pleased to announce the release of CSi Bridge, Version 17.2.0. This is an intermediate update to Versions 17.0.0 through 17.1.1. We recommend that...

Friday webinars!

Friday webinars!

April 29, 2015

Join the EDRMedeso technical team and register to our interesting and popular webinars today! For free! Choose one or more of our webinars!...

NEW dates! ANSYS Release 16.0 update training Structures

NEW dates! ANSYS Release 16.0 update training Structures

April 29, 2015

ANSYS 16.0 is the fastest, most versatile and accurate suite of simulation software products ever developed. It includes major advancements across the entire portfolio, including structures, fluids, e...

ANSYS 16.0 has been released and many of you will be downloading and installing the new version.

ANSYS 16.0 has been released and many of you will be downloading and installing the new version.

April 14, 2015

This information is aimed at current customers. If you’re not a current customer please contact EDRMedeso today!We’re providing several documents guiding you to successfully install this new v...

Perfect engineering with EDRMedeso

Perfect engineering with EDRMedeso

April 9, 2015

EDRMedeso helps Nordic organizations to optimize their product development process by replacing test labs and physical prototyping with advanced simulation. By offering a customized combination of lea...

ANSYS Release 16.0 update training for CFD

ANSYS Release 16.0 update training for CFD

April 8, 2015

We can now welcome all CFD people to our new training course "ANSYS Release 16.0 update for CFD.ANSYS 16.0 is the fastest, most versatile and accurate suite of simulation software products ever de...

You will find our earlier posts below.

Our customers

We use cookies to improve your experience on our website. Read more in our privacy policy. By browsing this website, you agree to our use of cookies.