[vc_row][vc_column width=”1/1″][vc_column_text headline=”ANSYS Finite Element Analysis (FEA) Solutions for Structural/Mechanical Product Development” preamble=”The primary ANSYS solution products in the structural area are ANSYS Mechanical and ANSYS Structural. Using these solutions, you can import geometries, optimize meshing, and set boundary conditions. Following these preprocessing steps, you can perform analyses of strength, vibration, motion and thermal properties of the system, and obtain graphic representations showing how these properties vary across the geometry under the chosen conditions. Based on these results, you may want to modify your design to address any problem areas and run the simulation again. After a few iterations, your results will reveal an optimal design of the part or system under development. “]View the videos below for step-by-step guidelines demonstrating how to perform some typical mechanical/structural simulations.[/vc_column_text][ComponentImage image_id=”853″ theme=”standard” ratio=”none”][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text]

Combine Harmonic Vibrations and Acoustic Simulation

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

 Automate the Analysis of Design Variations

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Easy Handling of Contacts in Large Assemblies

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_video link=”https://www.youtube.com/embed/yDfyA0CKa38″][/vc_column_inner][vc_column_inner width=”1/3″][vc_video link=”https://www.youtube.com/embed/Wz5ztMIOUYA”][/vc_column_inner][vc_column_inner width=”1/3″][vc_video link=”https://www.youtube.com/embed/cafy2BZr2XM”][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text]

Efficient Workflow for the Design of Thin Composites Structures

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

DesignLife Technology Tip: Simplifying Fatigue Analysis

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Simulation of 3D Composites

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_video link=”https://www.youtube.com/embed/0CmuMhStP9c”][/vc_column_inner][vc_column_inner width=”1/3″][vc_video link=”https://www.youtube.com/embed/MHVTff_gJWU”][/vc_column_inner][vc_column_inner width=”1/3″][vc_video link=”https://www.youtube.com/embed/5uh3HgZue7s”][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row section_bg_class=” section-white” padding_settings=”true” container_type_class=”container” show_hr=”false”][vc_column width=”1/2″][ComponentPopupForm buttontext=”Book a meeting with one of our experts” formid=”6″][/vc_column][vc_column width=”1/2″][/vc_column][/vc_row]

Our customers