Do you consider design and simulation as separate tasks, not possible to be performed in parallel and by one person? In this webinar you will discover how Ansys Discovery is tailored for bringing design and simulation closer, making it a unique and powerful tool for the design engineer.

 

Traditionally, design and simulation are treated as separate, siloed tasks. The gap between them is deemed large, especially since performing simulation is considered a complicated, time-consuming task to be done by experts in dedicated tools. Consequently, the design validation has been pushed late in the design process, often to the point were changes to the design are almost impossible. This frequently leads to a final design being full of compromises and suboptimal solutions.

In this webinar you will learn about:

  • How Ansys Discovery connects with your CAD tool.
  • How to perform quick and simple simulations and design checks in Ansys Discovery
  • The physics and multiphysics capabilities in Ansys Discovery
  • Why Ansys Discovery is the best “non-expert” simulation tool for design engineers.

Ansys Discovery is a simulation tool that aims to bridge the gap existing between design and simulation. Its power makes simulation a more relevant tool also early in the design process. It does this by integrating CAD and simulation more closely as well as democratizing simulation by simplifying the setup and providing real-time and instant results to your design changes.

Speaker: Steinar Thorsen, Senior Application Engineer, EDRMedeso

Time: 10.00-10.45 AM CEST

**This is a live, interactive webinar. As this is a truly dynamic event, the questions asked within the webinar will help drive its content and knowledge sharing. Please join us at the specified time and date to fully engage with our expert panel.**

Grab a cup of coffee or tea and enjoy!